Skip to content

How to Deflate an Air Mattress: A Simple Step By Step Guide

An air mattress can be a great addition to any home, but it can also be challenging and sometimes difficult to figure out how to deflate an air mattress. In this guide, we have provided tips on how to properly deflate your air mattress.

Deflating Your Built-In Pump Air Mattress

There are a few ways to deflate an air mattress, but the most common is by using the built-in pump. To do this, flip the “deflate” dial and press the “internal pump immediately begins releasing air” button. Depending on the brand of your air mattress, the button or dial may be labeled differently, but they all work in more or less the same way. It usually takes around 30 seconds to 10 minutes to deflate an air mattress completely.

If you have an air mattress with a built-in pump, follow these simple steps to deflate it:

1) Turn off the pump and remove the plug from the mattress.

2) Hold the valve open and turn on the pump until all of the air is out of the bed.

3) If there is still some air left in the mattress, hold the valve open and push on it until all of the air is gone.

If you don’t have a built-in pump, you can still deflate the mattress by using a separate pump. Just make sure that the nozzle of the pump is fit properly over the valve on the mattress and turn on the pump. Once all of the air is out, close the valve and remove the pump.

In order to deflate your built-in pump air mattress, open the valve and apply pressure. It may take 10 minutes or more to finish deflating completely, especially if the mattress is large or you applied minimal pressure. Make sure no air is left, so apply pressure throughout the process and again after thinking it has finished deflating.

Need an inflatable repair kit, get yours here.

Deflating Your Separate-Pump Air Mattress

Deflating the bed is done by using a pump to force air out of it. The first step in doing this is to make sure that you have your pump ready and connected with its wide-opening nozzle attached to the wide-opening mouth on your mattress. Once that part is complete, simply plug the power cord into an outlet and hold onto both handles while a friend applies pressure through all different levels to get rid of the air in the mattress.

You can also ask a friend to apply pressure or lie on top of the air bed which will also accelerate this process since they are able to provide extra assistance in pressing against them during deflation.

No Pump? No Problem – How To Deflate An Air Bed Without A Pump

There is a way to deflate an air mattress without the use of a pump. Open the valve that keeps the air in the inflatable and applying pressure from hands and knees can do the same job as a pump, but this method takes a bit longer compared to using an electric pump to deflate the inflatable.

How To Deflate An Air Bed Without An Electric or Manual Pump

There are a few ways to deflate an air mattress – without a pump. One way is to spread the mattress on a clean and cleared floor surface, unlock the air valve, and apply continuous pressure using both hands and knees to force the air out of the mattress.

This will take more time and effort but is very easy to do. Another way to deflate an air bed is by using a pump. If you have access to an electric pump, it’s much easier (Plug and deflate) and faster than doing it manually.

Check out a few of the best Air mattresses that come with a pump here.

How To Deflate An Air Mattress inflatable With A Vacuum Cleaner

This is a simple guide on how to deflate an air mattress using just your vacuum cleaner. If you don’t have a pump, this will be the only option for you!

1): Open the valve at one end of the mattress and secure it with duct tape around where it attaches to itself in order to create an airtight seal.

2) Turn on your vacuum cleaner (make sure there’s no bag inside!) and let some out slowly until all of that excess air has been removed from within that opening.

3) Once that’s done, simply seal it off with the duct tape and repeat for the other side. You’re done!

What is the fastest way to deflate an inflatable mattress?

The new air mattress model has the technology to deflate it and stop when it is completely deflated automatically. The fastest way to deflate an air mattress is to use an electric pump. It does it automatically while you are doing something else, like watching TV or talking on the phone.

How do you manually deflate an Intex air mattress?

To deflate an Intex air mattress, you can use a hand-held or electric inflator. The electric inflator is more powerful and the easiest to use. The electric inflator is more powerful, but it can be difficult to get the air into the mattress.

How do you fully deflate an air mattress?

You can deflate your air mattress by using the following steps:

– Use a pump to deflate the mattress.

– Remove all of the excess air from it by applying pressure with your hands and knees until there is no more leftover air left in it.

To completely deplete all of that extra space, repeat these two steps over and over again (until everything is eliminated).

When you’re done using your air mattress, it’s important to fully deflate the bed so that it takes up less space and fits back into its original packaging.

How do you open the valve on an air mattress?

A lot of people ask how to open the valve on an air mattress. There are two main types of valves- screw type and nob type, so follow the steps below for whichever kind it is that you have.

If your air mattress has a screw-type valve, you can unscrew it anti-clockwise and pull it out gently. This should open the valve and release the air from the mattress. The process usually takes a few seconds to minutes to complete.

For a nob-type when deflating the mattress, locate the valve and turn it counterclockwise. This will release air from the mattress. For nob-type or screw-type valves, just turn them anti-clockwise one time to open the valve.

Check the manufacturer guide on how to deflate the air mattress

There are a few ways to deflate an air mattress, but the most common is to follow the instructions from the manufacturer. This will tell you how to release the air from the bed in a safe and effective way. You can also use a vacuum cleaner or pump to remove the air, but be sure to read the instructions carefully first.

Leave a Reply

Your email address will not be published. Required fields are marked *

14 + 14 =